Wireless

Hi Everyone,please help me to set the default program boards. there is no option to set on cisco ap3802i. u-boot>> dump_board_envBoard env is unconfigured

Hello All,We are in the process of migrating from old cisco ap's and wlc's to new wlc's 9800-L and ap's 9136I. The dhcp server for all the vlans, ssid's etc are located in the core switch.Now, the issue is that when the AP's and WLC's are in the same...

In the AirOs system, on the 5520, the Network Spectrum Interface Key is found on the wireless/general  page.  However I can not find the key for devices attached to the IOSxe on the 9800..has that bit of Clean Air been removed in leu of all the new t...

Buenas tardes tengo una controladora C9800 con 23 AP en ella, los AP son  c9120AXE-A, lo que pasa es que 21 de ellos se me conectan a la wlc sin problema y los otros 2 no, la razón por la que no se conectan es " Type of error that occurred last Image...

Operating in underground mines, we often face problems with the cables to the access points.We have about 3000 access points in operation.What’s the best way to check if a cable is cut so an AP loses connection to the WLC?We mainly use the NETCONF in...

I have one C9105 access point. While upgradeing the C9105 OS, the OS became corrupted and when rebooted, characters became break. (meaningless foreign language) Is there any way to enter u-boot mode forcely? I have normal OS in boot2 section, so I wa...

Trying to find out what this means in cisco prime. This is a 5520 on 8.10.185.0 code. I have been having clients dropping and seeing this message in prime. WLC is up for 74 days  

Currently testing 9800 L, built 2, left one with a basic config so always have a guide and one with more config to match current 5520s before migration.Both 9800s are talking to prime, issue is one is one with more config now not updating AP details....

I have a vWLC controller, and I've requested SmartNet support from a partner. They've asked for the UID. Could someone guide me on how to obtain it, or if there an alternative method to acquire SmartNet for this virtual controller?

Hello,I have a problem. I have a Cisco 2702i AP with two wifis. The two networks run on 2.4GHz and 5GHz and so far work without problems.But as soon as I connect my Apple TV to the wifi, it triggers the following error message and then loses connecti...

Hi, I had performed the basic configuration on C9800-40 via CLI and now I'm accessing the WebUI for the first time. Unfortunately, there was no configuration tab in the WebUI and it is not a full WebUI. Alot of missing components. Anyone encounter th...

Hello Experts , I have an AP "AIR-LAP1041N-E-K9" which suddenly de-join from wlc and only joining again after AP reboot ,  This happens multiple time a day , i have collected logs during the issue from both AP and WLC , and would like to know what ex...