Dear Community,We are migrating from old wlc 2504 and old access points 3702e to the new 9800 wlc and new 9136I access points. The configuration on the new wlc has been migrated from the old wlc, and we will connect the new WLC 9800 while the old WLC...
Hi everyone, I'd like to ask a quick question. I would like to migrate int-vlan and routes from Cisco Catalyst 9500 (17.03.04) to a next generation firewall. I am making sure that the true sizing of sessions, throughput, connection per second etc.. W...
I have a 2811 router with default route 0.0.0.0 0.0.0.0 192.168.1.1 (my ISP Lan-side interface). I have DHCP server on the router for wired interfaces (e.g. 172.16.11.0 /24 through 172.16.18.0 /24) with 8 VLANs (711 - 718), but none of the 172.16 ra...
Hello everyone,I am having a problem with a PH5 Switch that I hope someone here can help me with. When I try to connect to the switch from a client PC, the ping is unstable. However, the switch seems to be working fine, and the traffic is normal.Inte...
So this is a topic that's been mentioned time and time again I'm sure but i wanted to get a bit more specific to my situation. We're replacing our core switch with a C9300 (we currently have a 3750). We have a pretty simple network. Any desk with a c...
Hi Allwe have migrated to ASAv devices for our RAS solution and they are in CSPC and being collected via SNMP and SSH protocols. all data including the ' show inventory ' is being sent to SNTC as i can see it on ' collected data ' for the devices in ...
Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...
Hi team,We have jsut deployed a CSPC 2.11 VM on ESXi 7.0.3. Having issues when entering CCO credentials to allow for checks of software updates. Error message advises vailidation of the credentials failed. Have attempted to setup the same via CLI ...
Hello All,We are in the process of migrating from old cisco ap's and wlc's to new wlc's 9800-L and ap's 9136I. The dhcp server for all the vlans, ssid's etc are located in the core switch.Now, the issue is that when the AP's and WLC's are in the same...
I have configured the netflow on my cisco ISR 4451 management interface but I am not able to collect data on my NMS server. Also i have given static route to my NMS server Source 10.146.96.101Destination (Collector): 10.146.104.35UDP Port :5111 Below...
Hello guys, I'd like to change the Management and Redundancy-Management Addresses on our two WLC 5508 which are in a HA-Cluster.We are also upgrading the firmware version (including the AP Supplementary Bundle). Currently one node is in the UP/Active...
I am looking for advice on a multi-path routing solution. We have a large global MPLS network that has ben primary path for along time and is being phased out over the next 18 months. I've built an IPSec route-based VPN tunnels between my home site (...
Hello, i need help with this error. I want to check segment routing information, but get this error: ERROR: Invalid xpath:/ios:native/ios:segment-routing/ios-segment-routing:traffic-eng/ios-segment-routing:interface/ios-segment-routing:metricUnkno...