VPN

I have a customer who is trying to connect to their SSL VPN via AnyConnect client. They have a Cisco ASA 5515x running ASA 8.6(1)2, using AnyConnect for windows 3.1.03103. They are on a  laptop that is running Windows 7. When the attempt to connect ...

Now that LDAPS to Duo Cloud has been deprecated, is there still a way to protect VPN access to a Cisco ASA using logins that are local accounts on the ASA?  And is it possible to do without a proxy server in the middle?  Everything I have found point...

Dear Guru's I am using Cisco ASA 5525-X and the Software version is 9.4(2).Device Manager version is 7.5(2).Internet is terminated on ASUS Router and WAN interface is configured via PPPoE.ASA is behind the ASUS router. (ONT -> Asus Router -> ASA 5525...

Hi All, I've configured tunnel from Cisco Asa to Palo Alto device. The tunnel is established but then once they reached the tunnel time out and try to establish the tunnel again it, the tunnel down/unstable.This is my config for Cisco ASA: Phase 1:IK...

Good day to everyone.I have two Cisco ASA running on FPR2130 assembled into a balancing group, for example:vpn-gw1.example.comvpn-gw2.example.comgeneral address vpn.example.com.Firmware version 9.18.3.56Anyconnect 4.10.07062At the moment, all our emp...

Hey guys - Does anyone else have this issue in the title with ASA using the WebVPN ? TLS handshakes are failing after the Chrome 124 updates. After doing research it's due to hybridized kyber support. The current workaround for Chrome/ Edge is below ...

We are running Cisco Secure Client 5.1.2 and have a requirement in that if the VPN cannot connect how can I still allow access to say microsoft / 365.Have tried setting the allow access to the following hosts with vpn disconnected in the profile but ...

 Hello and good day,We have set up a management tunnel and are testing it with both AnyConnect 4.10 and SecureClient 5.1. With both VPN clients, we have noticed that the Windows logon takes significantly longer, up to 5 minutes. We use an ASA with so...

I'm hoping I can explain this clearly enough. I have a remote site with a site-to-site tunnel. From the Home Office and the remote site, we are allowing a split tunnel, but we need to tunnel a specific external site via the home office.The IP Scope f...

Hello,  I create Ikev2 site to site tunnel between  two cisco FPR 1140. I have same subnet on both location and i used source and destionation NAT in one site. My user try access over web some aplication and it is work, but when other site try to acc...