About Ranjita

Ranjita · 05-01-2024

Hi All,I need some advice on AAA config. My switches are able to reach the RADIUS but the device still accepts only local login.Please have a look at the config and guide me on how to correct it:aaa group server radius AA-RADIUSserver-private 10.169....

Ranjita · 04-30-2024

Hi All,I have a network with 2 routers connected to firewalls in active/standby configuration.I would like to establish BGP peering between the routers and firewalls. The 2 routers are connected and routes will be learnt via iBGP. The issue is that i...

Ranjita · 04-24-2024

Hi All,I have a couple of C9300 L3 switches that are connecting to an ASA firewall. The NTP and the syslog server for the switches are located behind a firewall.When one of the switches request/send packets the gateway IP is the source address on the...

Ranjita · 04-22-2024

Hi All,I have 2 networks connected via OSPF. I need to route the connected networks to a third network via BGP.I noticed that BGP peering is established but no entry is visible on the routing table.Below is an extract of BGP config:router bgp 65200.1...

Ranjita · 04-19-2024

Hi All,I have a topology as shown below:The Firewalls A & B are running as active/standby. I have an etherchannel configured between L3 Switch A and Switch B. The switches also have HSRP running for various VLANs. The link between Switch and Firewall...

Ranjita · 05-02-2024

Hi ,Yes the ping works.I tried using source as well. I have updated the port X02YAL11UH001-KF002-SW#sh aaa serverRADIUS: id 6, priority 0, host 10.169.29.5, auth-port 1645, acct-port 1813, hostname UR-RADIUS_PrivateServer_10.169.29.5_1645_1813State: ...

Ranjita · 05-02-2024

Hi,pls check attachment

Ranjita · 05-02-2024

Hi,I am working on catalyst 9200 devices running on 17.9 IoS. The Radius server can be reached from the switch.I am unable to add my key in the config as suggested:X02YAL11UH001-KF002-(config-radius-server)#$ort 1645 ?acct-port UDP port for RADIUS ac...

Ranjita · 05-02-2024

Hi,Yes I am do sh run | inc aaaaaa new-modelaaa group server radius UR-RADIUSaaa authentication login default group UR-RADIUS localaaa authentication enable default enableaaa session-id common

Ranjita · 05-02-2024

Hi,Thanks for the suggestion. I updated my config and it didnt help.sh run | inc ip radiusip radius source-interface Vlan403Attached is the debug aaa file. The password for individual user is in line with RADIUS.

Member Since	‎11-04-2022 12:04 AM
Date Last Visited	‎04-30-2024 10:41 PM
Posts	66
Total Helpful Votes Received	7

User Statistics

User Activity

AAA Configuration

HSRP and BGP Peering

NTP and Syslog packets with specific IP Address

BGP using Layer 3 Switches

L3 Switches connecting to Firewalls

Re: AAA Configuration

Re: AAA Configuration

Re: AAA Configuration

Re: AAA Configuration

Re: AAA Configuration